For a full roll you need: products
Stock status: | none |
Type | Receiver |
Group | Mi Boxer |
Controll | RGB/RGBW |
MiBOXER RF RECEIVER 10A 2.4G 4 ZONE RGB + W
For a full roll you need: products
The MiBOXER receiver allows you to control the LED strip. The receiver is connected to the remote control using radio waves with a frequency of 2.4GHz. The receiver is mounted between the LED strip and the power supply, so it can be added at any stage of strip installation.
Connection diagram of the LED power supply, controller and LED strip
The receiver allows you to control the RGB+W LED strip. The receiver can be connected to the MiBOXER series remote control or, after pairing with a Wi-Fi gateway, the receiver's capabilities can be expanded with application or voice control.
The receiver allows control using applications and voice assistants. To do this, you need to pair it with a Wi-Fi gateway (sold separately). Using the application, you can adjust the lighting to the rhythm of your day. Lower brightness of light at night or turning on the lighting in the room in the morning – many possibilities from one application.
Pairing the remote control with the receiver is extremely simple. You should disconnect the main power supply from the receiver (1), then reconnect the power supply and, within the first 3 seconds, briefly hold down the previously selected channel on the remote control (2). The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
Dimensions | 85x45x22.5mm |
Tension | DC 12V-24V |
Work scope | 30m |
Work intensity | 6A per channel |
Maximum load | 10A |
Frequency | 2.4 GHz |
Wi-Fi Control | with Wi-Fi gateway |
Output connection | common anode |
Are you sure you want to perform this action?
The project you want to remove is in your shopping cart or has been sent as a request for quotation and is waiting for approval.