Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
25-2005-00
EAN: 5904405917497
5in1–15A – MONO / CCT / RGB / RGB + CCT, RF LED receiver
Your price:
Please contact your local distributor
| Stock status: | a lot |
| Type | Receiver |
| Group | Mi Boxer |
| Controll | Mono |
| Controll | RGB/RGBW |
| Controll | CCT |
| Controll | RGB + CCT |
The MiBOXER 5in1 radio receiver is a controller that allows you to control LED MONO, RGB, RGBW, CCT and RGB + CCT installations.
Available variants:
Type
Group
Controll
Product sold only as a complete set
Product description
The MiBOXER 5in1 radio receiver is a controller that allows you to control MONO, RGB, RGBW, CCT and RGB+CCT LED strips.
The MiBOXER receiver combined with the MiBOXER remote control are products with an interesting and original method of operation. The receiver is connected to the remote control using radio waves with a frequency of 2.4GHz. The receiver can be installed at any stage of LED strip assembly because it is mounted between the power supply and the strip.
Connection diagram of the LED power supply, controller and MONO LED strip
Connection diagram of the LED power supply, controller and CCT LED strip
Connection diagram of the LED power supply, controller and RGB LED strip
Connection diagram of the LED power supply, controller and RGBW LED strip
Connection diagram of the LED power supply, controller and RGB+CCT LED strip
The receiver allows control using applications and voice assistants. To do this, you need to pair it with a Wi-Fi gateway (sold separately). Using the application, you can adjust the lighting to the rhythm of your day. Lower brightness of light at night or turning on the lighting in the room in the morning – many possibilities from one application.
Thanks to the current of 15A, a longer section of the LED strip can be connected to the controller.
Different receiver models can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit a signal from the receiver to another device, thus increasing the range. Signal transmission is possible when the distance between subsequent devices is less than 30m.
Possibility of signal transmission and synchronization
Pairing the remote control with the receiver is extremely simple. You should disconnect the main power supply from the receiver (1), then reconnect the power supply and, within the first 3 seconds, briefly hold down the previously selected channel on the remote control (2). The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
| Dimensions | 128x38x23mm |
| Tension | DC 12V-24V |
| Work scope | ~30m |
| Work intensity | 6A per channel |
| Maximum load | 15A |
| Frequency | 2.4 GHz |
| Wi-Fi Control | with Wi-Fi gateway |
| Output connection | common anode |
| Autotransmission | yes |
| Signal synchronization | yes |
