Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2398-01
EAN: 5904405931776
LED Strip PRO 3Y 24V 2800 LED COB 12.6W 2700-2200K
Your price:
Please contact your local distributor
Price per 1 metre
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 2800 LED |
| Type Diodes | COB |
| Warranty | 5 years |
| Hue | Warm White |
| Color Temperature | 2700-2200K |
| Voltage | 24V |
| Power | 12.6 W/m |
| CRI | 90 |
| PCB width | 10mm |
| Cutting section | 50mm |
| Lifetime | 35000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
PCB width
Cutting section
Lifetime
Product sold only as a complete set
Product description
Change the color temperature of the LED strip by reducing the brightness of the light! The LED strip DIM to WARM LED from LED Labs Lighting is an innovative solution for creating a warm and cozy atmosphere in your room. When the brightness of the light is reduced, the colour temperature drops from 3000K to 2000K. The DIM to WARM LED strips from LED Labs Lighting are designed for rooms where it is important to create an atmosphere that promotes relaxation and tranquillity.
A characteristic feature of the tape is the use of a COB (Chip on Board) diode. The use of COB technology allows you to obtain a uniform light line. An additional advantage of using COB diodes in LED strips is a wider angle of light dispersion and high light efficiency. COB diodes emit a much better light beam compared to older LED technologies with lower energy consumption.
The 3Y LED strip series is a line of products intended for professionals. 3Y LED strips are signed with the LED Labs Lighting brand and covered by an extended warranty period. LED strips with an IP 20 rating are subject to a five-year warranty period. Thanks to the use of a PCB primer with 3oz copper, it was possible to significantly increase their service life. The 3Y series also has noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with a professional Blue Tape mounting tape, allowing for immediate application in a cleaned LED profile.
Ultra warm color
The ultra-warm white color is most similar to the light of traditional light bulbs. Light sources of this color will be ideal in rooms used for rest and recreation. Warm light is used in houses and apartments, making rooms more cozy.
IP20 LED strip
LED strips with an IP20 protection level are covered with a thin protective layer, which protects them against small pollutants. However, they do not have any additional protection, therefore they are not recommended in applications where increased resistance to moisture is required.
24V LED strips — lower voltage drops
The choice of 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows for the installation of longer sections of LED strip without the risk of voltage drops at the ends of the strip sections. Due to lower power consumption, 24V LED strips also allow the use of smaller cables, which can be helpful when designing installations. This allows you to hide the wires more easily. 24V LED strips are becoming more and more popular on the market.
See colors in their natural shades
CRI informs about how the colors of the illuminated object are reproduced. The higher the value, the more natural the items look. Naturally, as if they were illuminated by daylight. The use of a strip with a CRI parameter above 90 allows you to reflect the actual color of objects in the room where the LED strip is used.
Requires installation of a power supply.
The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding 10% to the calculated power of the power supply.
