Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2367-03
EAN: 5904405921937
LED Strip PRO 3Y 24V 2640 LED COB 10W CW RA90 HS
Your price:
Please contact your local distributor
| Stock status: | a lot |
| Degree of protection | IP65HS |
| Number of LEDs | 2640 LED |
| Type Diodes | COB |
| Warranty | 3 years |
| Hue | Cold White |
| Color Temperature | 6500K |
| Voltage | 24V |
| Power | 10 W/m |
| CRI | 90 |
| Cutting section | 45mm |
| Lifetime | 35000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
A uniform line of light in your home! Thanks to the increased number of diodes, it is possible to obtain a uniform light line even when using a low aluminum profile type D, Z or SOLIS. COB diodes, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption.
Cold white color
The cold white LED strip is intended as a decorative element indoors. Due to the ability to disperse light widely, lighting is widely used in creating light arrangements, as well as in emphasizing selected equipment components. It works well in rooms where we need a feeling of sterility. It brings a feeling of coolness to the room, so it can be used in places where we want to relax. It also works well in offices, production spaces, garages or as strong lighting for advertisements or shops.
IP65HS LED strip
Often, increasing the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a heat-shrinkable band was used, tightly covering the tape. This allows you to maintain IP65 waterproofness and high lighting parameters of the LED strip.
24V voltage - lower voltage drops
The choice of 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows for the installation of longer sections of LED strip without the risk of voltage drops at the ends of the strip sections. Due to lower power consumption, 24V LED strips also allow the use of smaller cables, which can be helpful when designing installations. This allows you to hide the wires more easily. 24V LED strips are becoming more and more popular on the market.
See colors in their natural shades
The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places.
Requires installation of a power supply.
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approximately 10%.
