Oświetlenie LED - LED LABS
16-2320-01 EAN: 5904405917053

LED Strip PRO 3YB 12V 2400 LED COB 10W CW

Your price: Please contact your local distributor
Stock status: a lot
Degree of protection IP20
Number of LEDs 2400 LED
Type Diodes COB
Warranty 3 years
Hue Cold White
Color Temperature 6500K
Voltage 12V
Power 10 W/m
Cutting section 25mm
Lifetime 35000

Available variants:

Degree of protection

Number of LEDs

Type Diodes

Warranty

Hue

Color Temperature

Voltage

Power

CRI

Cutting section

Lifetime

Product description

The 3Y Basic LED strips feature a 3-year warranty. LED strips of this series are embedded on a 2oz copper PCB substrate. The LED strip is equipped with a double-sided Blue Tape mounting strip. 

A characteristic feature of the COB LED strip is the use of a special COB (Chip on Board) diode. The use of COB technology allows you to obtain a uniform light line even when using the lowest LED profiles. COB LEDs emit a uniform line of light compared to older LED technologies with lower energy consumption.

Cold white color

The cold white LED strip is intended as a decorative element indoors. Due to the ability to disperse light widely, lighting is widely used in creating light arrangements, as well as in emphasizing selected equipment components. It works well in rooms where we need a feeling of sterility. It brings a feeling of coolness to the room, so it can be used in places where we want to relax. It also works well in offices, production spaces, garages or as strong lighting for advertisements or shops.

IP20

IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It is an insulator that protects the product against minor contamination. The tape is used in places where there is no need to use products with increased water resistance.

See colors in their natural shades

The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places. 

Power supply required

The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding 10% to the calculated power of the power supply.