Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
Stock status: | a lot |
Group | To the profile |
Controll | Mono |
Touch switch dimmer for mirror – white
Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
The controller has a delay off function responsible for gradual dimming of the lighting when turned off.
Thanks to the delay off function, we can freely leave the illuminated room.
TOUCH switch with PWM 12/24V DC dimmer intended for single-color LED strips. The switch is suitable for installation in a LUMINES aluminum profile with internal dimensions over 10 mm. It can be mounted in the profile behind the lampshade, due to the characteristic of switching on by touching the plate. The place where the plate is located is illuminated by one LED.
The switch is a very aesthetic and practical solution, e.g. when using LED lighting above the kitchen counter.
When using a dense tape 600 LED 3528 with a power of 9.6W/m, which allows you to obtain equal, optimal light over the countertop, we can connect up to 6 meters of strip to the controller.
Pressing the lampshade in the place of the plate turns the lighting on/off. Holding the switch down for more than 2 seconds will cause the LED to blink and enter the light intensity adjustment mode. The plate under the lampshade must be higher than the distance between the part where the LED strip is glued and the lampshade.
Installation of the Touch controller in the LUMINES A profile
Version | touch |
Tension | 12V / 24V |
Max. output current | 5A / 3A |
Power | 60W / 72W |
Dimming function | Yes |
Dimming time (for 100% light intensity) | 20 s +/- 1s |
Dimming time (for 50% light intensity) | 10 - 11 s |
Waterproof | IP20 |
Dimensions | 55x10mm |
Are you sure you want to perform this action?
The project you want to remove is in your shopping cart or has been sent as a request for quotation and is waiting for approval.