For a full roll you need: products
Incorrect quantity in the roll
Product description
The controller allows you to control each digital section with an RGB LED strip. The tape section is marked with cutting points and each of them is controlled completely independently. It is possible to program any color and effect - with a completely smooth transition from one color to another as well as static and dynamic effects.
A 12-24V power source should be connected to the device from the DC connector side, and the LED strip should be connected to the 3-pin connector side. When the power supply exceeds the rated power of the controller, it is recommended to connect the LED strip directly to the power supply (not through the controller).
| Input voltage | 12-24V DC |
| Number of checkpoints | 300 integrated circuits |
| Maximum current | 6A |
| Maximum power | 72W przy 12V; 144W przy 24V |
| Remote control power supply | 1x CR2032 (included) |
| Connection | female DC connector and 3-pin JST connector |
| Compatible with integrated circuits | WS2811 WS2812 |
| Remote control range | 15m |
| Effects mode | 358 types |
| Supports LED strips | Digital RGB |
| Dimensions of the remote control | 84 x 40 x 5mm |
| Controller dimensions | 70 x 13 x 6mm |
| IP protection level | IP20 |
| Working temperature | -20°~+50°C |
