Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2087-01
EAN: 5907775756161
LED Strip PRO 3YB 24V 300 LED 2835 SMD 6W, Cold white
Your price:
Please contact your local distributor
Price per 1 metre
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 300 LED |
| Type Diodes | SMD 2835 |
| Warranty | 3 years |
| Hue | Cold White |
| Color Temperature | 6500K |
| Voltage | 24V |
| Power | 6 W/m |
| CRI | 80 |
| Cutting section | 100mm |
| Lifetime | 20000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
The 3Y Basic LED strips feature a 3-year warranty. LED strips of this series are embedded on a 2oz copper PCB substrate. The LED strip is equipped with a double-sided Blue Tape mounting strip.
Cold white color
The light of the cold white strip gives a glow in a tinge close to blue. The cold color stimulates the body to work and is a good solution in places where concentration is required. It can be used in doctors' surgeries, markets or as advertising backlights.
IP20
The IP20 parameter for the LED strips defines the most common degree of waterproofing found on the market. The IP20 strips are the LED strips designed for use where there is no risk of excessive moisture or exposure to water. The LED band specified with such a degree of protection allows exposure to dry dust and dirt, thanks to the protective layer with which the LEDs mounted on the band are covered.
See colors in their natural shades
When choosing a LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light colour is to natural daylight. This affects the way our eyes perceive illuminated objects. The value of the RA parameter is measured between 0 and 100, where the maximum result reproduces the effect of daylight. This is the most desirable value. The LED strips with a parameter above CRI>80 allow natural colour reproduction on the illuminated objects.
24V LED strip
Longer light installations do not have to entail voltage drops. Choosing the 24V LED strips means that longer LED strip sections can be used. This is due to the lower current consumption, compared to 12V installations. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to conceal.
Power supplies
The LED strips require the installation of the power supply. When choosing the power supply, please take into account the output voltage (it must be the same as the LED strip voltage), the mounting location and the power. The power supply depends on the wattage and the length of the LED strip section. The wattage of the strip should be multiplied by its length. We recommend adding a 10% reserve to the calculated power supply output.
