For a full roll you need: products
16-2073-01
EAN: 5907775750039
LED Strip PRO 3Y 24V 640 LED 2835 SMD 12W, Neutral white 130lm/W
Your price:
€8.59
gross
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 640 LED |
| Type Diodes | SMD 2835 |
| Warranty | 5 years |
| Hue | Neutral |
| Color Temperature | 4000K |
| Voltage | 24V |
| Power | 12 W/m |
| CRI | 80 |
| Cutting section | 62,5mm |
| Lifetime | 26200 |
PRO 3Y 24V 640 LED 2835 SMD 12W Neutral white
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Incorrect quantity in the roll
Product description
The 3Y series of LED strips are strips with an extended warranty period. For tapes with protection class IP65 and IP65HS, the warranty period is 3 years, for IP20 tapes, it is a 5-year warranty! Additionally, 3Y series tapes are characterized by lower voltage drops thanks to the PCB backing used with 3oz copper. The tapes have double-sided Blue Tape mounting tape.
Neutral white
LED strip intended for use as an element of the main lighting of rooms, for the construction of LED fixtures, for illuminating exhibitions and shop windows or a worktop in the kitchen. Neutral light is not as tiring for the eyes as a cold color, but it allows for a much greater amount of light than when using a warm color. It is closest to daylight, so it allows for relatively best color rendering of objects. Thanks to its universality, it fits virtually any room style. It will work well as main lighting, above the kitchen counter or as a work light in the office.
24V voltage - lower voltage drops
Thanks to 24V voltage, we can connect up to twice as long sections of LED strips when connecting in series than with 12V LED strips. This is due to lower power consumption. Lower power consumption will also translate into a smaller cross-section of wires needed for installation, which will make it much easier to hide them during installation.
See colors in their natural shades
When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. This affects the way our eyes perceive illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reflects the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow for natural color reproduction on illuminated objects.
IP20 LED strip
IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip.
Requires installation of a power supply
LED strips are powered by low, safe voltage. You need a power supply to connect them. The choice of power supply depends on the parameters of the LED strip. 24V tapes require a power supply with an output voltage of 24V. Another important aspect is appropriate power. The power of the power supply must be adapted to the power and length of the tape being installed. If the length of the LED strip is 5 m, the power of the LED strip should be multiplied by 5. It is worth adding 10% of the power reserve. Our offer includes furniture, hermetic and slim power supplies: their choice depends on the installation location.
Why is it worth choosing the professional version of the LED strip?
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. When deciding to install a professional LED strip, we are almost 100% sure that each roll of the strip will have the same color and luminous flux.
