For a full roll you need: products
16-2084-01
EAN: 5907775754334
LED Strip PRO 3Y 24V 600 LED 3527 SMD 20W CCT
Your price:
€17.82
gross
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 600 LED |
| Type Diodes | SMD 3527 |
| Warranty | 5 years |
| Hue | Multicolor |
| Color Temperature | 3000K |
| Color Temperature | 6500K |
| Voltage | 24V |
| Power | 20 W/m |
| CRI | 80 |
| Cutting section | 50mm |
| Lifetime | 26200 |
| System | A, B, C, D, G, H, Y, Z, E, F, I6, I10, Q18, W, MICO, COSMO, RETO, TERRA, SCALA, SILEDA, inSILEDA, DILEDA, inDILEDA, UNICO, DOPIO, SOLIS, ILEDO, INSO, CLARO, DULIO, TALIA, inTALIA, LARGO, inLARGO, MONO, ZATI, SUBLI, SORGA, TIANO, FLARO, APA12, APA16, IPA12, IPA16, LOGI, CONVA, TOPO, PERO, VEDA, Largo M1, Largo M2, Largo M3, Largo M4, Talia M1, Talia M2, Talia M3, Talia M4, J, DUAL, RUNO, Q20, MODI, U, GEMI, FALCO, PLATO, GAUDI, HIRO |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
System
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Incorrect quantity in the roll
Product description
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
CCT LED strip
CCT LED strips have the ability to change the color temperature. One LED strip allows you to obtain warm and cold light. The CCT LED strip will find particular application where there is a need to change the indoor climate. A cold color will stimulate you to work, and changing to a warm color will create a cozy interior atmosphere. The CCT strip requires the installation of an LED driver.
24V LED strips – lower voltage drops
The choice of 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows for the installation of longer sections of LED strip without the risk of voltage drops at the ends of the strip sections. Due to lower power consumption, 24V LED strips also allow the use of smaller cables, which can be helpful when designing installations. This allows you to hide the wires more easily. 24V LED strips are becoming more and more popular on the market.
IP20 LED strip
IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip.
See colors in their natural shades
The CRI parameter determines the way in which light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to the way they look when exposed to daylight. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the daylight effect. The use of LED strips with a CRI parameter above 80 allows for a more natural and pleasant color reproduction on illuminated objects.
600 LED 3527 SMD strip
The density of the LED strip determines how many diodes there are per meter of the strip. The more diodes on a meter of LED strip, the more uniform and strong the light. Strips with a density of 120 LED/m allow for obtaining a uniform line of light. To prevent the light beads from being visible, it is recommended to install the profile with an appropriate lampshade.
Requires installation of a power supply
The LED strip requires a low DC voltage of 24V. In order for the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be appropriately selected due to the power of the tape. The power related to 1 meter should be multiplied by the length of the tape in meters. It is worth adding 10% power reserve. Depending on the installation location, you can choose a slim slim power supply, a waterproof hermetic power supply or a furniture power supply.
Requires installation of LED driver
A driver is needed to install the CCT LED strip. Thanks to it, it is possible to change the color temperature. When choosing a driver, an important parameter is voltage (the driver is mounted between the power supply and the LED strip).
Why is it worth choosing the professional version of the LED strip?
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
p>
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
