For a full roll you need: products
16-2055-01
EAN: 5903175315809
LED Strip PRO 3Y 24V 600 LED 2835 SMD 12W, Cold white
Your price:
€6.84
gross
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 600 LED |
| Type Diodes | SMD 2835 |
| Warranty | 5 years |
| Hue | Cold White |
| Color Temperature | 6500K |
| Voltage | 24V |
| Power | 12 W/m |
| CRI | 80 |
| Cutting section | 50mm |
| Lifetime | 26200 |
600 LED 2835 SMD PCB 10 mm 3oz Cold white
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Incorrect quantity in the roll
Product description
The 3Y series of LED strips are strips with an extended warranty period. For tapes with protection class IP65 and IP65HS, the warranty period is 3 years, for IP20 tapes, it is a 5-year warranty! Additionally, 3Y series tapes are characterized by lower voltage drops thanks to the PCB backing used with 3oz copper. The tapes have double-sided Blue Tape mounting tape.
Cold white
The cold white LED strip can be used as a decorative element. Cold light has a blue glow, bringing a feeling of coolness to the room. The tape is perfect for illuminating a room's decorative element.
IP20 LED strip
LED strips with IP20 protection class are covered with a thin protective layer, which protects them against small pollutants. However, they do not have any additional protection, therefore they are not recommended in applications where increased resistance to moisture is required.
24V LED strips – lower voltage drops
The 24V LED strip guarantees lower voltage drops compared to the 12V LED strip. This is especially important when serially installing longer sections of tape. While we recommend connecting 12V LED strips (with single-sided power supply) into maximum 5-meter sections, 24V strips allow you to create up to twice as long LED strip sections.
See colors in their natural shades
When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. This affects the way our eyes perceive illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reflects the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow for natural color reproduction on illuminated objects.
Requires installation of a power supply
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approx. 10%
Why is it worth choosing the professional version of the LED strip?
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
