Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2340-03
LED Strip PRO 3Y 24V 350 LED 2835 SMD 6W WW RA90 HS
Your price:
€5.84
gross
| Stock status: | none |
| Degree of protection | IP65HS |
| Number of LEDs | 350 LED |
| Type Diodes | SMD 2835 |
| Warranty | 3 years |
| Hue | Warm White |
| Color Temperature | 3000K |
| Voltage | 24V |
| Power | 6 W/m |
| CRI | 90 |
| Cutting section | 100mm |
| Lifetime | 35000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
The 3Y series of LED strips are strips with an extended warranty period. For tapes with protection class IP65 and IP65HS, the warranty period is 3 years, for IP20 tapes, it is a 5-year warranty! Additionally, 3Y series tapes are characterized by lower voltage drops thanks to the PCB backing used with 3oz copper. The tapes have double-sided Blue Tape mounting tape.
Warm white color
The warm white color, thanks to pleasant light similar to the light of traditional light bulbs, is a solution suitable for installation in rooms intended for relaxation and everyday activity. Warm white light is not associated with the cold color of lighting typical of offices, which allows for relaxation and rest.
IP65HS LED strip
Often, increasing the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a heat-shrinkable band was used, tightly covering the tape. This allows you to maintain IP65 waterproofness and high lighting parameters of the LED strip.
24V LED strips — lower voltage drops
When installing longer sections of LED strip, it is worth choosing a 24V strip. This will reduce voltage drops that could occur when installing a 12V tape. Additionally, thinner wires can be used to install the 24V strip, which will make it easier to hide them during installation.
See colors in their natural shades
CRI informs about how the colors of the illuminated object are reproduced. The higher the value, the more natural the items look. Naturally, as if they were illuminated by daylight. The use of a strip with a CRI parameter above 90 allows you to reflect the actual color of objects in the room where the LED strip is used.
350 LED 2835 SMD strip
Diode 2835 - it is an energy-saving diode of small size. It is a more powerful alternative to the 3528 diode. Density is one of the parameters characterizing the LED strip. It indicates how many diodes are placed on a meter of tape. The more diodes there are on the LED strip, the more uniform the light emitted. This, in turn, allows for eliminating the phenomenon of beads, i.e. points of light. In addition to the density, the presence of beads is influenced by the height of the profile in which the strip and the lampshade are placed. Strips with a density of 70 LEDs per meter allow for a line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.
Requires installation of a power supply.
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approximately 10%.
