Oświetlenie LED - LED LABS
16-2360-01 EAN: 5904405921869

LED Strip PRO 3Y 24V 350 LED 2835 SMD 6W UWW RA90

Your price: €4.97 gross
Stock status: a lot
Degree of protection IP20
Number of LEDs 350 LED
Type Diodes SMD 2835
Warranty 5 years
Hue Ultra Warm White
Color Temperature 2700K
Voltage 24V
Power 6 W/m
CRI 90
Cutting section 100mm
Lifetime 35000

in meters
Available variants:

Degree of protection

Number of LEDs

Type Diodes

Warranty

Hue

Color Temperature

Voltage

Power

CRI

Cutting section

Lifetime

Product description

The 3Y LED strip series is a line of products intended for professionals. 3Y LED strips are signed with the LED Labs Lighting brand and covered by an extended warranty period. LED strips with an IP 20 rating are subject to a five-year warranty period. Thanks to the use of a PCB primer with 3oz copper, it was possible to significantly increase their service life. The 3Y series also has noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with a professional Blue Tape mounting tape, allowing for immediate application in a cleaned LED profile.

Ultra warm white color

The ultra-warm color tape is used as decorative lighting, adding a cozy accent to the room. It can be used as accent lighting for shelves and furniture.

IP20 LED strip

IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but provides protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip.

See colors in their natural shades

The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places. 

 

350 LED 2835 SMD strip

Diode 2835 - it is an energy-saving diode of small size. It is a more powerful alternative to the 3528 diode. Visible light points in the LED strip are the result of the point arrangement of LED diodes. The more diodes there are on the strip, the more uniform the light we will obtain. Strips with a density of 70 LEDs per meter enable a uniform line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.

Requires installation of a power supply.

The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding 10% to the calculated power of the power supply.