Oświetlenie LED - LED LABS
16-2332-03

LED Strip PRO 3Y 24V 350 LED 2835 SMD 6W NW RA90 HS

Your price: €5.84 gross
Stock status: a lot
Degree of protection IP65HS
Number of LEDs 350 LED
Type Diodes SMD 2835
Warranty 3 years
Hue Neutral
Color Temperature 4000K
Voltage 24V
Power 6 W/m
CRI 90
Cutting section 100mm
Lifetime 35000

in meters
Available variants:

Degree of protection

Number of LEDs

Type Diodes

Warranty

Hue

Color Temperature

Voltage

Power

CRI

Cutting section

Lifetime

Product description

3Y LED strips have an extended warranty period. 3 years warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created lighting installation. Each LED strip from the 3Y series is equipped with a Blue Tape mounting tape.

Neutral white color

A neutral color is the color that is closest to sunlight. This is the most universal color of LED strips, which can be used both in home spaces and in workplaces. Such light is not tiring for the human eye. Neutral LED strip is also a good solution for office lighting. The neutral white color is perfect for rooms where we spend a lot of time.

IP65HS LED strip

Often, increasing the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a heat-shrinkable band was used, tightly covering the tape. This allows you to maintain IP65 waterproofness and high lighting parameters of the LED strip.

24V LED strips — lower voltage drops

When installing longer sections of LED strip, it is worth choosing a 24V strip. This will reduce voltage drops that could occur when installing a 12V tape. Additionally, thinner wires can be used to install the 24V strip, which will make it easier to hide them during installation.

See colors in their natural shades

CRI informs about how the colors of the illuminated object are reproduced. The higher the value, the more natural the items look. Naturally, as if they were illuminated by daylight. The use of a strip with a CRI parameter above 90 allows you to reflect the actual color of objects in the room where the LED strip is used.

350 LED 2835 SMD strip

Diode 2835 - it is an energy-saving diode of small size. It is a more powerful alternative to the 3528 diode. Density is one of the parameters characterizing the LED strip. It indicates how many diodes are placed on a meter of tape. The more diodes there are on the LED strip, the more uniform the light emitted. This, in turn, allows for eliminating the phenomenon of beads, i.e. points of light. In addition to the density, the presence of beads is influenced by the height of the profile in which the strip and the lampshade are placed. Strips with a density of 70 LEDs per meter allow for a line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.

Requires installation of a power supply.

LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approximately 10%.