Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
25-0000-63
EAN: 5904405917503
Mi Boxer universal WiFi receiver 12-24V 15A 5in1
Your price:
Please contact your local distributor
| Stock status: | average |
| Type | Receiver |
| Group | Mi Boxer |
The MiBOXER 5in1 radio receiver is a controller that allows you to control LED MONO, RGB, RGBW, CCT and RGB + CCT installations.
Available variants:
Type
Group
Product sold only as a complete set
Product description
The MiBOXER 5-in-1 radio receiver is a controller that allows you to control MONO, RGB, RGBW, CCT and RGB+CCT LED strips. All installations can be controlled using one remote control. The receiver has a built-in Wi-Fi gateway, which allows you to control the lighting using Android or iOS devices. Thanks to the WL-5 MiBOXER controller, the light can be controlled by voice by connecting the device to the Google Assistant and Amazon Alexa applications.
Connection diagram of the LED power supply, controller and MONO LED strip
Connection diagram of the LED power supply, controller and CCT LED strip
Connection diagram of the LED power supply, controller and RGB LED strip
Connection diagram of the LED power supply, controller and RGBW LED strip
Connection diagram of the LED power supply, controller and RGB+CCT LED strip
Different receiver models can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit a signal from the receiver to another device, thus increasing the range. Signal transmission is possible when the distance between subsequent devices is less than 30m.
Possibility of signal transmission and synchronization
Pairing the remote control with the receiver is extremely simple. You should disconnect the main power supply from the receiver (1), then reconnect the power supply and, within the first 3 seconds, briefly hold down the previously selected channel on the remote control (2). The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
| Dimensions | 124x38x23mm |
| Power | DC12~24V |
| Frequency | 2.4 GHz |
| Work intensity | 6A per channel |
| Maximum load | 15 A |
| Communication module | WiFi-IEEE 802.11b/g/n 2.4GHz |
| Operating temperature | -20~60℃ |
