Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2049-01
EAN: 5903175315724
LED Strip PRO 3Y 24V 300 LED 5050 SMD 16W RGBNW
Your price:
Please contact your local distributor
Price per 1 metre
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 300 LED |
| Type Diodes | SMD 5050 |
| Warranty | 5 years |
| Hue | Multicolor |
| Color Temperature | 4000K |
| Voltage | 24V |
| Power | 16 W/m |
| PCB width | 10mm |
| Cutting section | 100mm |
| Lifetime | 26200 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
PCB width
Cutting section
Lifetime
Product sold only as a complete set
Product description
The LED strips offered by our company have a wide range of possibilities for functional and comfortable installation of attractive interior design. Professional LED strips are characterized by high energy efficiency, efficiency and the ability to create a unique visual effect, which have all kinds of applications. Starting from decorative lighting, through main lighting in the living room, room, kitchen, bathroom, to professional lighting in offices and supermarkets.
RGBNW LED strip
The RGBNW LED strip is a multicolor strip with the option of obtaining a neutral white color. RGB diodes allow you to obtain light in colors from the RGB color palette, and additional diodes emit neutral white light. The LED strip requires the installation of a controller that allows you to change the color of the light and turn on the white light.
IP20 LED strip
IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but provides protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip.
24V LED strips — lower voltage drops
Thanks to 24V voltage, we can connect up to twice as long sections of LED strips when connecting in series than with 12V LED strips. This is due to lower power consumption. Lower power consumption will also translate into a smaller cross-section of wires needed for installation, which will make it much easier to hide them during installation.
300 LED 5050 SMD strip
The 5050 diode is a larger diode than the frequently encountered 3528 and 2835 diodes. The increased size allows for greater light emission. Often used as functional lighting, e.g. for lighting a bathroom mirror. Strips with a density of 60 LEDs per meter enable a uniform line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.
Requires installation of a power supply.
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approximately 10%.
Why is it worth choosing the professional version of the LED strip?
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long service life.
Professional tapes, different from Standard tapes, are characterized by a higher luminous flux, so despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as a Standard tape.
An additional advantage of using professional tape is that the tape life is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
