Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2301-01
EAN: 5907775758752
LED Strip PRO 3Y 24V 2640 LED COB 10W NW RA90
Your price:
€14.10
gross
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 2640 LED |
| Type Diodes | COB |
| Warranty | 5 years |
| Hue | Neutral |
| Color Temperature | 4000K |
| Voltage | 24V |
| Power | 10 W/m |
| CRI | 90 |
| Cutting section | 45mm |
| Lifetime | 26200 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
A characteristic feature of the tape is the use of a COB (Chip on Board) diode. The use of COB technology allows you to obtain a uniform light line even when using the lowest LED profiles. An additional advantage of using COB diodes in LED strips is a wider angle of light dispersion and high light efficiency. COB diodes emit a much better light beam compared to older LED technologies with lower energy consumption.
Control LED strips in a convenient way: using hand movement, voice or remote control. The drivers allow you to use all the possibilities offered by LED technology. The controller can be placed in a profile, where it can be controlled using a button or a motion sensor. It can also be hidden with the power supply and controlled via radio waves. There are also WiFI drivers that allow voice control using voice assistants and devices running on Android and iOS systems. The possibilities are almost endless.
Neutral white color
LED strip intended for use as an element of the main lighting of rooms, for the construction of LED fixtures, for illuminating exhibitions and shop windows or a worktop in the kitchen. Neutral light is not as tiring for the eyes as a cold color, but it allows for a much greater amount of light than when using a warm color. It is closest to daylight, so it allows for relatively best color rendering of objects. Thanks to its universality, it fits virtually any room style. It will work well as main lighting, above the kitchen counter or as a work light in the office.
IP20 LED strip
IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip.
24V LED strips — lower voltage drops
Longer lighting installations do not have to involve voltage drops. The choice of 24V LED strips allows the use of longer sections of LED strip. This is due to lower current consumption compared to 12V installations. This also allows the use of smaller cable cross-sections needed for installation, which makes it easier to hide them.
See colors in their natural shades
CRI informs about how the colors of the illuminated object are reproduced. The higher the value, the more natural the items look. Naturally, as if they were illuminated by daylight. The use of a strip with a CRI parameter above 90 allows you to reflect the actual color of objects in the room where the LED strip is used.
2640 LED COB strip
Visible light points in the LED strip are the result of the point arrangement of LED diodes. The more diodes there are on the tape, the more uniform the light we will obtain. Thanks to the use of COB (chip on board) diodes, a larger number of diodes and the emission of a better light beam do not require higher power consumption compared to SMD tapes.
Requires installation of a power supply.
Installation of an LED lighting system based on LED strips requires the installation of a power supply that allows the mains voltage to be reduced to 12 or 24V, depending on the LED strips used. When designing LED lighting, it is worth remembering that the power supply is an integral part of the entire system, the efficient functioning of which is related not only to the selection of a professional LED strip, but also a reliable LED power supply. Power supplies are installed in invisible, often hard-to-reach places, so it is very important that when choosing an LED power supply, you make a choice that allows for many years of operation. The choice of power supply depends on the power of the LED strip, its voltage and installation length. It is also worth paying attention to the shape and size of the power supply to ensure the most convenient installation.
Why is it worth choosing the professional version of the LED strip?
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long service life.
Professional tapes, different from Standard tapes, are characterized by a higher luminous flux, so despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as a Standard tape.
An additional advantage of using professional tape is that the tape life is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
