Make a call

16-2338-03 EAN: 5904405920275

LED Strip PRO 3Y 12V 600 LED 2835 SMD 9.6W CW RA90

Your price: Please contact your local distributor

Price per 1 metre

Stock status:	a lot
Degree of protection	IP20
Number of LEDs	600 LED
Type Diodes	SMD 2835
Warranty	5 years
Hue	Cold White
Color Temperature	6500K
Voltage	12V
Power	9,6 W/m
CRI	90
Cutting section	25mm
System	A, B, C, D, G, H, Y, Z, E, F, I6, I10, Q18, W, MICO, COSMO, RETO, TERRA, SCALA, SILEDA, inSILEDA, DILEDA, inDILEDA, UNICO, DOPIO, SOLIS, ILEDO, INSO, CLARO, DULIO, TALIA, inTALIA, LARGO, inLARGO, MONO, ZATI, SUBLI, SORGA, TIANO, FLARO, APA12, APA16, IPA12, IPA16, LOGI, CONVA, TOPO, PERO, VEDA, Largo M1, Largo M2, Largo M3, Largo M4, Talia M1, Talia M2, Talia M3, Talia M4, J, DUAL, RUNO, Q20, MODI, U, GEMI, FALCO, PLATO, GAUDI, HIRO, DUO, V, SLIMO, FIXO, FOLDO, Foldo M1, Fixo M1, FASSO, STRADA, Strada M1, Strada M3

Available variants:

Degree of protection

Number of LEDs

Type Diodes

Warranty

System

Hue

Color Temperature

Voltage

Power

CRI

Cutting section

Lifetime

Product description

The 3Y LED strip series is a line of products intended for professionals. 3Y LED strips are signed with the LED Labs Lighting brand and covered by an extended warranty period. LED strips with an IP 20 rating are subject to a five-year warranty period. Thanks to the use of a PCB primer with 3oz copper, it was possible to significantly increase their service life. The 3Y series also has noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with a professional Blue Tape mounting tape, allowing for immediate application in a cleaned LED profile.

Cold white color

The light of the cold white tape introduces a glow similar to blue. The cold color stimulates the body to work and is a good solution in places where concentration is required. It can be used in doctor's offices, supermarkets or as illuminated advertisements.

IP20 LED strip

IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It is an insulator that protects the product against minor contamination. The tape is used in places where there is no need to use products with increased water resistance.

See colors in their natural shades

The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places.

600 LED 2835 SMD strip

Diode 2835 - it is an energy-saving diode of small size. It is a more powerful alternative to the 3528 diode. Density is one of the parameters characterizing the LED strip. It indicates how many diodes are placed on a meter of tape. The more diodes there are on the LED strip, the more uniform the light emitted. This, in turn, allows for eliminating the phenomenon of beads, i.e. points of light. In addition to the density, the presence of beads is influenced by the height of the profile in which the strip and the lampshade are placed. Strips with a density of 120 LED/m allow for obtaining a line of light. To prevent the light beads from being visible, it is recommended to install the profile with an appropriate lampshade.

Requires installation of a power supply.

LED strips are powered by low, safe voltage. You need a power supply to connect them. The choice of power supply depends on the parameters of the LED strip. 12V tapes require a power supply with an output voltage of 12V. Another important aspect is appropriate power. The power of the power supply must be adapted to the power and length of the tape being installed. If the length of the LED strip is 5 m, the power of the LED strip should be multiplied by 5. It is worth adding 10% of the power reserve. Our offer includes furniture, hermetic and slim power supplies: their choice depends on the installation location.