Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2326-03
LED Strip PRO 3Y 12V 600 LED 2835 SMD 9.6W CW RA90 HS
Your price:
€6.99
gross
| Stock status: | a lot |
| Degree of protection | IP65HS |
| Number of LEDs | 600 LED |
| Type Diodes | SMD 2835 |
| Warranty | 3 years |
| Hue | Cold White |
| Color Temperature | 6500K |
| Voltage | 12V |
| Power | 9,6 W/m |
| CRI | 90 |
| Cutting section | 25mm |
| Lifetime | 35000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
System
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
3Y LED strips are a series of strips with an extended warranty period. The warranty is 5 years for tapes with IP20 protection level and 3 years for IP65HS tapes. Additionally, the tapes are characterized by lower voltage drops thanks to the 3oz copper backing. Equipped with Blue Tape mounting tape.
Cold white
Cold white is a color with a blue glow. When installed in a room, it gives a sense of sterility. The color of cold white light stimulates the body to work. It will work well where concentration is needed.
IP65HS LED strip
IP65 Heat Shrink LED strips are a product with increased resistance to moisture and splashes. Thanks to the use of a special heat-shrinkable band, whose characteristics differ from the traditional silicone coating found in waterproof tapes, it is a modern solution that allows for better color uniformity than in the case of LED strips with classic IP65. This solution allows maintaining high lighting parameters wherever we need increased resistance to moisture and splashes.
See colors in their natural shades
The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places.
Requires installation of a power supply
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approx. 10%
