Oświetlenie LED - LED LABS
16-1014-01

LED Strip 300 LED 60 LED/m 5050 SMD, Neutral white

Your price: Please contact your local distributor
Price per 1 metre
Stock status: none
Degree of protection IP20
Number of LEDs 300 LED
Type Diodes SMD 5050
Warranty 2 years
Hue Neutral
Voltage 12V
Power 14,4 W/m
Roll length 5m

Tape 300 LED 60 LED / m 5050 SMD, Neutral

Available variants:

Degree of protection

Number of LEDs

Type Diodes

Warranty

Hue

Voltage

Power

Lifetime

Roll length

Product description

We offer LED strip lighting products are an amazing effect suitable for lighting rooms, ceilings, shelves and many other places. They characterized by a wide-angle light scattering (120 degrees) and the safe supply voltage of 12V DC. We demarcate them into several types, colors and degrees of airtightness, depending on the location and uses.

Tape 300 LED 5050 SMD Cold White PREMIUM (14,4W / m) is designed for use as part of the main room lighting, the construction of lamps to illuminate the exhibitions and shop windows or worktop in the kitchen. Light neutral is not as tiring for the eyes as cold color while you can definitely get more light from warm colors. It is the most similar to daylight and thus the color of objects it is the best completions. Thanks to its versatility fits virtually any style of room. Check as the main light above the worktop or as light to work in the office.

Please remember not to mix and match episodes longer than five meters in series and in parallel. On each tape voltage drop. If at the beginning of the tape served with 12V power supply, then at the end we have from one to two volts less, the band shines less and more heats which will burn her. not to mix and match episodes longer than five meters in series and in parallel. On each tape voltage drop. If at the beginning of the tape served with 12V power supply, then at the end we have from one to two volts less, the band shines less and more heats which will burn her. not to mix and match episodes longer than five meters in series and in parallel. On each tape voltage drop. If at the beginning of the tape served with 12V power supply, then at the end we have from one to two volts less, the band shines less and more heats which will burn her.
Light colors:

Warm white (2700K - 3500K) - recommended for private and secluded places where most the rest. The color of the LED light is very similar to the color of the light from the incandescent light bulb.

Neutral white (4000K - 4500K) - color lights should be placed in a place where it is required invigorating work atmosphere, where our eyes will be exposed to a lot of effort. The use of this light color is important especially in autumn or winter. This light color works well for lighting: signs, road signs, for the purposes of exhibition, lighting of representation.

cold white(5500K- 11000K) - intensely cold light having a bluish tint. Suitable rooms a more sterile, cool tone, while also adding the optically space. Also often used in dental offices, production halls. It is not recommended for home use.

RGB - Ribbon Multicolored LED light with three colors: R - red, G - green, B - blue.

RGBW - Tape Multicolored LED of the three colors of light: red R, G - green, B - blue and an additional diode of a white hot or cold. There is also a variant RGBWW / CW. The selection of an appropriate LED strip:

In the case of selecting the appropriate LED strip we must be guided primarily by light parameters.



Mocy4,8W tape ( 300 LED 3528 ) and 7.2 ° W (150 LED 5050) can be successfully used as elements the most sophisticated decorating ideas, as a backlight shelves cavities, ceilings, stairs.

Tapes power 14,4W / m ( 300 LED 5050 ) and 18,8W / m (300 LED 5630) are intended for use as primary lighting component.

Band power 9,6W / m ( 600 LED 3528 ) Ornamental fixture is recommended for illumination in the kitchen, on the desk, or as a decorative light stronger.

Hermeticity:

IP20- it allows them to be used indoors, in a place in which it will be exposed to moisture or water continuous casting.

IP65 - LED strip coated with a special gel or other resin material, intended to protect the LEDs and the electronic circuit throughout the section, from water, moisture or dust. We use, among others, in the bathroom, the bathtub or sink, or above the worktop in the kitchen.