For a full roll you need: products
14-7056-00
EAN: 5903175315601
TOUCH switch with dimmer PWM 60W / 12V 72W / 24V
Your price:
€10.30
gross
| Stock status: | a lot |
| Group | To the profile |
| Controll | Mono |
Touch switch with PWM dimmer 12 / 24V DC.
Available variants:
Group
Controll
Incorrect quantity in the roll
Product description
TOUCH switch with PWM 12/24V DC dimmer intended for single-color LED strips. The switch is suitable for installation in a LUMINES aluminum profile with internal dimensions over 10 mm. It can be mounted in the profile behind the lampshade, due to the characteristic of switching on by touching the plate. The place where the plate is located is illuminated by one LED.
The switch is a very aesthetic and practical solution, e.g. when using LED lighting above the kitchen counter.
When using a dense tape 600 LED 3528 with a power of 9.6W/m, which allows you to obtain equal, optimal light over the countertop, we can connect up to 6 meters of tape to the controller.
Pressing the lampshade in the place of the plate turns the lighting on/off. Holding the switch down for more than 2 seconds will cause the LED to blink and enter the light intensity adjustment mode. The plate under the lampshade must be higher than the distance between the part where the LED strip is glued and the lampshade.
Installation of the Touch controller in the LUMINES A profile
| Version | touch |
| Tension | 12V / 24V |
| Max. output current | 5A / 3A |
| Power | 60W / 72W |
| Dimming function | Yes |
| Waterproof | IP20 |
| Dimensions | 55x10mm |
