For a full roll you need: products
25-0000-44
Mi Boxer RECEIVER 12A RF 2.4G 4 ZONE RGB + CCT
Your price:
€12.42
gross
| Stock status: | a lot |
| Type | Receiver |
| Group | Mi Boxer |
| Controll | RGB + CCT |
Available variants:
Type
Group
Controll
Incorrect quantity in the roll
Product description
The MiBOXER receiver allows you to control the LED strip. The receiver is connected to the remote control using radio waves with a frequency of 2.4GHz. The receiver is mounted between the LED strip and the power supply, so it can be added at any stage of strip installation.
Connection diagram of the LED power supply, controller and LED strip
The receiver allows you to control the RGB+CCT LED strip. The receiver can be connected to the MiBOXER series remote control or, after pairing with a Wi-Fi gateway, the receiver's capabilities can be expanded with application or voice control.
After adding a Wi-Fi gateway, it is possible to control the lighting using Android and IOS devices. This allows you to adjust the lighting to the rhythm of the day and control it remotely from anywhere. It is also possible to control the lighting using Google Assistant and Amazon Alexa voice assistants.
Different receiver models can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit a signal from the receiver to another device, thus increasing the range. Signal transmission is possible when the distance between subsequent devices is less than 30m.
Possibility of signal transmission and synchronization
Pairing the remote control with the receiver is extremely simple. You should disconnect the main power supply from the receiver (1), then reconnect the power supply and, within the first 3 seconds, briefly hold down the previously selected channel on the remote control (2). The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
| Dimensions | 119x37.5x22mm |
| Tension | DC 12V-24V |
| Work scope | ~30m |
| Work intensity | 6A per channel |
| Maximum load | 12A |
| Frequency | 2.4 GHz |
| Wi-Fi Control | with Wi-Fi gateway |
| Output connection | common anode |
| Autotransmission | yes |
| Signal synchronization | yes |
