Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
25-0000-40
Mi Boxer RECEIVER 12A RF 2.4G 4 ZONE CCT
Your price:
Please contact your local distributor
| Stock status: | a lot |
| Type | Receiver |
| Group | Mi Boxer |
| Controll | CCT |
Available variants:
Type
Group
Controll
Product sold only as a complete set
Product description
The MiBOXER receiver allows you to control the LED strip. The receiver is connected to the remote control using radio waves with a frequency of 2.4GHz. The receiver is mounted between the LED strip and the power supply, so it can be added at any stage of strip installation.
Connection diagram of the LED power supply, controller and LED strip
The receiver allows you to control the CCT LED strip. The receiver can be connected to the MiBOXER series remote control or, after pairing with a Wi-Fi gateway, the receiver's capabilities can be expanded with application or voice control.
The receiver allows control using applications and voice assistants. To do this, you need to pair it with a Wi-Fi gateway (sold separately). Using the application, you can adjust the lighting to the rhythm of your day. Lower brightness of light at night or turning on the lighting in the room in the morning – many possibilities from one application.
The device is characterized by the ability to transmit a signal from the receiver to another device, thus increasing the range. Signal transmission is possible when the distance between subsequent devices is less than 30m
Possibility of signal transmission and synchronization
Pairing the remote control with the receiver is extremely simple. You should disconnect the main power supply from the receiver (1), then reconnect the power supply and, within the first 3 seconds, briefly hold down the previously selected channel on the remote control (2). The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
| Dimensions | 119x37.5x22mm |
| Tension | DC 12V-24V |
| Work scope | 30m |
| Work intensity | 6A per channel |
| Maximum load | 12A |
| Frequency | 2.4 GHz |
| Wi-Fi Control | with Wi-Fi gateway |
| Output connection | common anode |
| Autotransmission | yes |
