Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
Product sold only as a complete set
Product description
The MiBOXER receiver combined with the MiBOXER remote control are products with an interesting and original method of operation. The receiver is connected to the remote control using radio waves with a frequency of 2.4GHz. The receiver can be installed at any stage of LED strip assembly because it is mounted between the power supply and the strip.
Connection diagram of the LED power supply, controller and LED strip
RGBW strip receiver. The receiver can be connected to the MiBOXER series remote control or, after pairing with a Wi-Fi gateway, the receiver's capabilities can be expanded with application or voice control.
The receiver allows control using applications and voice assistants. To do this, you need to pair it with a Wi-Fi gateway (sold separately). Using the application, you can adjust the lighting to the rhythm of your day. Lower brightness of light at night or turning on the lighting in the room in the morning – many possibilities from one application.
Different receiver models can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit a signal from the receiver to another device, thus increasing the range. Signal transmission is possible when the distance between subsequent devices is less than 30m. The model includes an improved transmission method that speeds up the transmission of the signal to subsequent receivers.
Possibility of signal transmission and synchronization
Do not disturb function
"Do not disturb" function prevents the controller from turning on automatically after the power is restored in the event of a temporary power outage. The function can be activated and deactivated using the remote control.
Extended frequency range
The high and low frequency range has been extended to 16k-250Hz. In this way, the flickering effect is reduced, which allows for a smoother transition when dimming the light.
Option to control lighting with the push-dimm key.
Pairing the remote control with the receiver is extremely simple. You should disconnect the main power supply from the receiver (1), then reconnect the power supply and, within the first 3 seconds, briefly hold down the previously selected channel on the remote control (2). The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
| Dimensions | 36x17x74,5mm |
| Tension | DC 12V-24V |
| Work scope | 30m |
| Frequency | 2.4GHz |
| Operating temperature | -10~40°C |
