Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2319-01
EAN: 5904405917046
LED Strip PRO 3YB 12V 2400 LED COB 10W NW
Your price:
Please contact your local distributor
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 2400 LED |
| Type Diodes | COB |
| Warranty | 3 years |
| Hue | Neutral |
| Color Temperature | 4000K |
| Voltage | 12V |
| Power | 10 W/m |
| CRI | 90 |
| Cutting section | 25mm |
| Lifetime | 35000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
The 3Y basic series are LED strips mounted on a PCB base with 2 oz copper content. They are covered by a 3-year warranty period. The LED strip is equipped with a double-sided Blue Tape mounting tape.
A uniform line of light in your home! Thanks to the increased number of diodes, it is possible to obtain a uniform light line even when using a low aluminum profile type D, Z or SOLIS. COB diodes, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption.
Neutral white color
A neutral white LED strip allows for more light. This is the color that is closest to daylight. Even a long stay in a room lit with a neutral light source is not tiring for the eyes. Thanks to this, the tape can be used universally and will work well in virtually any room.
IP20
IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It is an insulator that protects the product against minor contamination. The tape is used in places where there is no need to use products with increased water resistance.
See colors in their natural shades
The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places.
Power supply required
The LED strip requires a low DC voltage of 12V (24V). In order for the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be appropriately selected due to the power of the tape. The power related to 1 meter should be multiplied by the length of the tape in meters. It is worth adding 10% power reserve. Depending on the installation location, you can choose a slim slim power supply, a waterproof hermetic power supply or a furniture power supply.
