For a full roll you need: products
Stock status: | little |
Degree of protection | IP65HS |
Number of LEDs | 600 LED |
Type Diodes | SMD 2835 |
Warranty | 3 years |
Hue | Neutral |
Color Temperature | 4000K |
Voltage | 24V |
Power | 12 W/m |
CRI | 80 |
Cutting section | 50mm |
Lifetime | 26200 |
LED 2835 SMD PCB 10 mm 3oz Neutral white IP65 HS
For a full roll you need: products
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
LED strip intended for use as an element of the main lighting of rooms, for the construction of LED fixtures, for illuminating exhibitions and shop windows or a worktop in the kitchen. Neutral light is not as tiring for the eyes as a cold color, but it allows for a much greater amount of light than when using a warm color. It is closest to daylight, so it allows for relatively best color rendering of objects. Thanks to its universality, it fits virtually any room style. It will work well as main lighting, above the kitchen counter or as a work light in the office.
The LED strip with IP65HS protection class is covered with a heat-shrinkable band that tightly covers the strip. This provides increased protection against moisture. Because the heat shrink band is thinner than the silicone layer, IP65HS tapes are characterized by higher brightness than tapes with the same parameters with IP65 protection.
Longer lighting installations do not have to involve voltage drops. The choice of 24V LED strips allows the use of longer sections of LED strip. This is due to lower current consumption compared to 12V installations. This also allows the use of smaller cable cross-sections needed for installation, which will make them easier to hide.
The CRI parameter determines the way in which light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to the way they look when exposed to daylight. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the daylight effect. The use of LED strips with a CRI parameter above 80 allows for a more natural and pleasant color reproduction on illuminated objects.
LED strips are powered by low, safe voltage. You need a power supply to connect them. The choice of power supply depends on the parameters of the LED strip. 24V tapes require a power supply with an output voltage of 24V. Another important aspect is appropriate power. The power of the power supply must be adapted to the power and length of the tape being installed. If the length of the LED strip is 5 m, the power of the LED strip should be multiplied by 5. It is worth adding 10% of the power reserve. Our offer includes furniture, hermetic and slim power supplies: their choice depends on the installation location.
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long life.
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
Are you sure you want to perform this action?
The project you want to remove is in your shopping cart or has been sent as a request for quotation and is waiting for approval.