Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2045-01
EAN: 5907775758707
LED Strip PRO 3Y 24V 300 LED 5050 SMD 12W CCT
Your price:
Please contact your local distributor
Price per 1 metre
| Stock status: | a lot |
| Degree of protection | IP20 |
| Number of LEDs | 300 LED |
| Type Diodes | SMD 5050 |
| Warranty | 5 years |
| Hue | Multicolor |
| Voltage | 24V |
| Power | 12 W/m |
| PCB width | 10mm |
| Cutting section | 100mm |
| Lifetime | 26200 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Voltage
Power
PCB width
Cutting section
Lifetime
Product sold only as a complete set
Product description
3Y LED strips have an extended warranty period. 3 years warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created lighting installation. Each LED strip from the 3Y series is equipped with a Blue Tape mounting tape.
CCT LED strip
CCT LED strips have the ability to change the color temperature. One LED strip allows you to obtain warm and cold light. The CCT LED strip will find particular application where there is a need to change the indoor climate. A cold color will stimulate you to work, and changing to a warm color will create a cozy interior atmosphere. The CCT strip requires the installation of an LED driver.
IP20 LED strip
IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but provides protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip.
24V LED strips — lower voltage drops
When installing longer sections of LED strip, it is worth choosing a 24V strip. This will reduce voltage drops that could occur when installing a 12V tape. Additionally, thinner wires can be used to install the 24V strip, which will make it easier to hide them during installation.
See colors in their natural shades
When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. This affects the way our eyes perceive illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reflects the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow for natural color reproduction on illuminated objects.
300 LED 5050 SMD strip
The 5050 diode is a larger diode than the frequently encountered 3528 and 2835 diodes. The increased size allows for greater light emission. Often used as functional lighting, e.g. for lighting a bathroom mirror. Strips with a density of 60 LEDs per meter enable a uniform line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.
Requires installation of a power supply.
The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding 10% to the calculated power of the power supply.
Why is it worth choosing the professional version of the LED strip?
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long service life.
Professional tapes, different from Standard tapes, are characterized by a higher luminous flux, so despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as a Standard tape.
An additional advantage of using professional tape is that the tape life is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
