Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2302-03
EAN: 5907775759445
LED Strip PRO 3Y 12V 300 LED 5050 SMD 12W CW IP65HS
Your price:
€8.19
gross
| Stock status: | a lot |
| Degree of protection | IP65HS |
| Number of LEDs | 300 LED |
| Type Diodes | SMD 5050 |
| Warranty | 3 years |
| Hue | Cold White |
| Voltage | 12V |
| Cutting section | 50mm |
| Lifetime | 26200 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Voltage
Cutting section
Lifetime
Product sold only as a complete set
Product description
The 3Y LED strip series is a line of products intended for professionals. 3Y LED strips are signed with the LED Labs Lighting brand and covered by an extended warranty period. LED strips with an IP 20 rating are subject to a five-year warranty period. Thanks to the use of a PCB primer with 3oz copper, it was possible to significantly increase their service life. The 3Y series also has noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with a professional Blue Tape mounting tape, allowing immediate application in a cleaned LED profile.
Cold white
Cold white is a color with a blue glow. When installed in a room, it gives a sense of sterility. The color of cold white light stimulates the body to work. It will work well where concentration is needed.
IP65HS LED strip
The LED strip with IP65HS protection level is covered with a heat-shrinkable band that tightly covers the strip. This provides increased protection against moisture. Because the heat shrink band is thinner than the silicone layer, IP65HS tapes are characterized by higher brightness than tapes with the same parameters with IP65 protection.
See colors in their natural shades
The CRI parameter determines the way in which light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to the way they look when exposed to daylight. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the daylight effect. The use of LED strips with a CRI parameter above 80 allows for a more natural and pleasant color reproduction on illuminated objects.
300 LED 5050 SMD strip
The 5050 diode is a diode with a larger size than the frequently encountered 3528 and 2835 diodes. The increased size allows for greater light emission. The density of the LED strip determines how many diodes there are per meter of the strip. The more diodes on a meter of LED strip, the more uniform and strong the light. Strips with a density of 60 LEDs per meter enable a uniform line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.
Requires installation of a power supply
The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding a 10% margin to the calculated power of the power supply.
Why is it worth choosing the professional version of the LED strip?
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long-term durability.
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
p>
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
