For a full roll you need: products
Stock status: | none |
Degree of protection | IP20 |
Number of LEDs | 300 LED |
Type Diodes | SMD 3528 |
Warranty | 5 years |
Hue | Neutral |
Color Temperature | 4000K |
Voltage | 12V |
Power | 4,8 W/m |
CRI | 80 |
Cutting section | 50mm |
Lifetime | 26200 |
Tape PRO 300 LED 3528 SMD Neutral.
For a full roll you need: products
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
Neutral color is closest to sunlight. It can be used wherever our eyes are forced to strain: at work, in the office and at home. It is the most universal color of light.
IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are a long-lasting choice. The lack of a waterproof cover improves heat dissipation from the LED strip, which translates into the life expectancy of the LED strip. The LED strip in strips with IP20 tightness copes perfectly with dust and dry contaminants thanks to the protective layer covering the LED diodes.
When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. This affects the way our eyes perceive illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reflects the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow for natural color reproduction on illuminated objects.
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approx. 10%
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long life.
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
Are you sure you want to perform this action?
The project you want to remove is in your shopping cart or has been sent as a request for quotation and is waiting for approval.