Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2321-03
LED Strip PRO 3Y 12V 300 LED 2835 SMD 4.8W WW RA90 HS
Your price:
€5.18
gross
| Stock status: | a lot |
| Degree of protection | IP65HS |
| Number of LEDs | 300 LED |
| Type Diodes | SMD 2835 |
| Warranty | 3 years |
| Hue | Warm White |
| Color Temperature | 3000K |
| Voltage | 12V |
| Power | 4,8 W/m |
| CRI | 90 |
| Cutting section | 50mm |
| Lifetime | 35000 |
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Product sold only as a complete set
Product description
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
Warm white color
The warm white color, thanks to pleasant light similar to the light of traditional light bulbs, is a solution suitable for installation in rooms intended for relaxation and everyday activity. Warm white light is not associated with the cold color of lighting typical of offices, which allows for relaxation and rest.
IP65HS LED strip
Often, increasing the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a heat-shrinkable band was used, tightly covering the tape. This allows you to maintain IP65 waterproofness and high lighting parameters of the LED strip.
See colors in their natural shades
CRI informs about how the colors of the illuminated object are reproduced. The higher the value, the more natural the items look. Naturally, as if they were illuminated by daylight. The use of a strip with a CRI parameter above 90 allows you to reflect the actual color of objects in the room where the LED strip is used.
300 LED 2835 SMD strip
Diode 2835 - it is an energy-saving diode of small size. It is a more powerful alternative to the 3528 diode. Density is one of the parameters characterizing the LED strip. It indicates how many diodes are placed on a meter of tape. The more diodes there are on the LED strip, the more uniform the light emitted. This, in turn, allows for eliminating the phenomenon of beads, i.e. points of light. In addition to the density, the presence of beads is influenced by the height of the profile in which the strip and the lampshade are placed. Strips with a density of 60 LEDs per meter allow for a line of light. To avoid visible light points, it is recommended to use an LED profile with an appropriate lampshade.
Requires installation of a power supply.
The LED strip requires the installation of a power supply. When choosing a power supply, you should take into account the output voltage (it must be the same as the voltage of the LED strip), installation location and power. The power of the power supply depends on the power and length of the LED strip section. The power of the tape should be multiplied by its length. We recommend adding 10% to the calculated power of the power supply.
