0
ledlabs sprzedawca
How to cut the LED strips
The LED strip is a lighting element that allows almost infinite arrangement possibilities. However, different solutions require the use of different strip lengths. It is often necessary to cut the strip to the correct length. How to cut the LED strip so as not to damage it?
Each LED strip can be cut to the required length. In the case of strips with a voltage of 12V, the places of cuts occur every 3 LED diodes, while in strips with a voltage of 24V, the places of cuts occur every 6 LED diodes. The distance between the cuts depends on the type of diode and the thickness of the strip.
The cut line occurs in places with copper plates. On some strips, this line is additionally marked with a scissors symbol. After cutting the strip, the copper plates allow the resulting pieces to be connected with a cable or, if necessary, with another piece of the strip. Special connectors are used to connect the strips, enabling the strips to be connected in a straight line or at an angle. The tapes can also be soldered. See the article "How to solder the LED strips?"
150 3525 LED strip
Voltage: 12V
possibility of cutting every 10 cm approx.
150 5050 LED strip
Voltage: 12V
possibility of cutting every 10 cm approx.
300 3528 LED strip
Voltage: 12V
possibility of cutting every 5 cm approx.
Parameters:
Rated power [W]: 4,8 W/m
Diodes type: SMD 3528
IP Rating: IP20
Number of diodes per 1 m: 60/m
Voltage: 24V
possibility of cutting every 10 cm approx.
Parameters:
Rated power [W]: 4,8 W/m
Diodes type: SMD 3528
IP Rating: IP20
Number of diodes per 1 m: 60/m
300 5050 LED strip
Voltage: 12V
possibility of cutting every 5 cm approx.
Parameters:
Rated power [W]: 14,4 W/m
Diodes type: SMD 5050
IP Rating: IP20
Number of diodes per 1 m: 60/m
Voltage: 24V
possibility of cutting every 10 cm approx.
Parameters:
Rated power [W]: 14,4 W/m
Diodes type: SMD 5050
IP Rating: IP20
Number of diodes per 1 m: 60/m
600 3528 LED strip
Voltage: 12V
possibility of cutting every 2,5 cm approx.
Parameters:
Rated power [W]: 9,6 W/m
Diodes type: SMD 3528
IP Rating: IP20
Number of diodes per 1 m: 120/m
Voltage: 24V
possibility of cutting every 5 cm approx.
Parameters:
Rated power [W]: 9,6 W/m
Diodes type: SMD 3528
IP Rating: IP20
Number of diodes per 1 m: 120/m
1200 2216 LED strip
Voltage: 24V
possibility of cutting every 2,5 cm approx.
Parameters:
Rated power [W]: 15 W
Diodes type: SMD 2216
Lighting angle [degrees]: 120°
IP Rating: IP20
600 4040 LED strip
Voltage: 24V
possibility of cutting every 5 cm approx.
Parameters:
Rated power [W]: 18 W
Diodes type: SMD 4040
Lighting angle [degrees]: 150°
IP Rating: IP20
Number of diodes per 1 m: 120/m
Length [m]: 1 m
Power supply voltage: 220÷240V 50÷60Hz