For a full roll you need: products
25-0000-42
Mi Boxer RECEIVER 12A RF 2.4G 4 ZONE RGB
Your price:
€11.80
gross
| Stock status: | none |
| Type | Receiver |
| Group | Mi Boxer |
| Controll | RGB/RGBW |
Available variants:
Type
Group
Controll
Incorrect quantity in the roll
Product description
The MiBOXER receiver combined with the MiBOXER remote control are products with an interesting and original method of operation. The receiver is connected to the remote control using radio waves with a frequency of 2.4GHz. The receiver can be installed at any stage of LED strip assembly because it is mounted between the power supply and the strip.
Connection diagram of the LED power supply, controller and LED strip
The receiver for RGB strips is characterized by an innovative solution for mounting lighting elements. By connecting the MiBOXER receiver with the MiBOXER RGB remote control (available separately), you can easily control the tape connected to a given controller. The number of controllers that can be connected to a given remote control is practically unlimited.
The receiver allows control using applications and voice assistants. To do this, you need to pair it with a Wi-Fi gateway (sold separately). Using the application, you can adjust the lighting to the rhythm of your day. Lower brightness of light at night or turning on the lighting in the room in the morning – many possibilities from one application.
Different receiver models can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit a signal from the receiver to another device, thus increasing the range. Signal transmission is possible when the distance between subsequent devices is less than 30m.
Possibility of signal transmission and synchronization
Pairing the remote control with the receiver is extremely simple (1). You should disconnect the main power supply from the receiver, then reconnect the power supply and briefly hold down the previously selected channel on the remote control (2) during the first 3 seconds. The effect of correct pairing of the devices will be the LED strip (3) blinking three times.
Pairing diagram of the receiver with the remote control
| Dimensions | 119x37.5x22mm |
| Tension | DC 12V-24V |
| Work scope | 30m |
| Work intensity | 6A per channel |
| Maximum load | 12A |
| Frequency | 2.4 GHz |
| Wi-Fi Control | with Wi-Fi gateway |
| Output connection | common anode |
| Autotransmission | yes |
| Signal synchronization | yes |
