For a full roll you need: products
16-2041-03
EAN: 5903175315694
LED Strip PRO 3Y 24V 300 LED 2835 SMD 6W, Warm white IP65HS
Your price:
€5.84
gross
| Stock status: | average |
| Degree of protection | IP65HS |
| Number of LEDs | 300 LED |
| Type Diodes | SMD 2835 |
| Warranty | 3 years |
| Hue | Warm White |
| Color Temperature | 3000K |
| Voltage | 24V |
| Power | 6 W/m |
| CRI | 80 |
| Cutting section | 100mm |
| Lifetime | 26200 |
300 LED 2835 SMD PCB 10 mm 3oz Warm white IP65 HS
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Incorrect quantity in the roll
Product description
3Y LED strips are strips with a PCB backing containing 3oz copper, which reduces voltage drops. The tapes are covered by an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series is equipped with Blue Tape mounting tape.
Warm white color
The warm white color of the LED strip is closest to the light of a traditional light bulb. It will work well in rooms intended for rest and recreation.
IP65HS LED strip
IP65 Heat Shrink LED strips are a product with increased resistance to moisture and splashes. Thanks to the use of a special heat-shrinkable band, whose characteristics differ from the traditional silicone coating found in waterproof tapes, it is a modern solution that allows for better color uniformity than in the case of LED strips with classic IP65. This solution allows maintaining high lighting parameters wherever we need increased resistance to moisture and splashes.
24V LED strips – lower voltage drops
The choice of 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows for the installation of longer sections of LED strip without the risk of voltage drops at the ends of the strip sections. Due to lower power consumption, 24V LED strips also allow the use of smaller cables, which can be helpful when designing installations. This allows you to hide the wires more easily. 24V LED strips are becoming more and more popular on the market.
See colors in their natural shades
The CRI parameter determines the way in which light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to the way they look when exposed to daylight. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the daylight effect. The use of LED strips with a CRI parameter above 80 allows for a more natural and pleasant color reproduction on illuminated objects.
Requires installation of a power supply
LED strips are light sources powered by low, so-called safe voltage. This means that to install an LED lighting system, we need a power supply that allows the mains voltage to be reduced to the voltage required by the product being installed. In the case of LED strips, we are talking about 12V or 24V voltage. When choosing a power supply, it is also necessary to calculate the power of the power supply, which results from the length and power of the LED strip used. When selecting an LED power supply, after calculating the required power, it is good practice to increase the value by approx. 10%
Why is it worth choosing the professional version of the LED strip?
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long life.
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
