Make a call

16-3011-01

LED Strip PRO 5Y 24V 640 LED 2835 SMD 12W 5000K RA90

Your price: Please contact your local distributor

Stock status:	a lot
Degree of protection	IP20
Number of LEDs	640 LED
Type Diodes	SMD 2835
Warranty	7 years
Hue	Neutral
Color Temperature	5000K
Voltage	24V
Power	12 W/m
CRI	90
Cutting section	62,5mm
Lifetime	35000

LED Strip 640 LED 128 LED/m 2835 SMD, Ultra cold White

Information card

Available variants:

Degree of protection

Number of LEDs

Type Diodes

Warranty

Hue

Color Temperature

Voltage

Power

CRI

Cutting section

Lifetime

Product description

The 5Y series are LED strips with a seven-year warranty. Careful selection of diodes ensures uniform light color along the entire length of the LED strip. They are characterized by a low dispersion of color temperatures at SDCM level 3 (Standard Deviation Color Matching). An additional advantage is a high color rendering index CRI (90) and a 3oz PCB primer. Each LED strip has a tesa 4965 double-sided adhesive tape, which is the best double-sided tape on the market.

Neutral white

Neutral color is the color that is closest to sunlight. This is the most universal color of LED strips, which can be used both in home spaces and in workplaces. Such light is not tiring for the human eye. Neutral LED strip is also a good solution for office lighting. The neutral white color is perfect for rooms where we spend a lot of time.

IP20 LED strip

IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It is an insulator that protects the product against minor contamination. The tape is used in places where there is no need to use products with increased water resistance.

See colors in their natural shades

The CRI value ranges from 0 to 100. A value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI of 80, which can be considered suitable for indoor use. Level 90 and higher allows for almost perfect color reproduction and will work even in the most demanding places.

640 LED 2835 SMD strip

Diode 2835 - it is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. The density of the LED strips indicates the number of diodes per meter of the LED strip. The number of diodes has a key impact on the presence of beads in LED strips, i.e. visible light points. The higher the density (the more diodes there are per meter of tape), the more uniform the light is, creating the so-called line of light. The number of diodes also affects the cutting section of LED strips. The more diodes, the more often we can cut the tape. Tapes with a density of 128 LEDs/m allow for obtaining a uniform line of light. To prevent the light beads from being visible, it is recommended to install the profile with an appropriate lampshade.

24V LED strips – lower voltage drops

Thanks to 24V voltage, we can connect up to twice as long sections of LED strips when connecting in series than with 12V LED strips. This is due to lower power consumption. Lower power consumption will also translate into a smaller cross-section of wires needed for installation, which will make it much easier to hide them during installation.

Requires installation of a power supply

LED strips are powered by low, safe voltage. You need a power supply to connect them. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with an output voltage of 24V. Another important aspect is appropriate power. The power of the power supply must be adapted to the power and length of the tape being installed. If the length of the LED strip is 5 m, the power of the LED strip should be multiplied by 5. It is worth adding 10% of the power reserve. Our offer includes furniture, hermetic and slim power supplies: their choice depends on the installation location.