Unfortunately, the following products are missing: products
* LED Strips P65, IP67, and IP67HS sold in 5m rolls
* LED Neon sold in 5m rolls
* PLANET LED Panels available in bulk packaging of 6 pieces
16-2032-03
EAN: 5907775754259
LED Strip PRO 3Y 12V 600 LED 3528 SMD 9.6W, Warm white IP65HS
Your price:
€6.99
gross
| Stock status: | none |
| Degree of protection | IP65HS |
| Number of LEDs | 600 LED |
| Type Diodes | SMD 3528 |
| Warranty | 3 years |
| Hue | Warm White |
| Color Temperature | 3000K |
| Voltage | 12V |
| Power | 9,6 W/m |
| CRI | 80 |
| Cutting section | 25mm |
| Lifetime | 26200 |
| Roll length | 5m |
Tape PRO 600 LED 3528 SMD Cold White.
Available variants:
Degree of protection
Number of LEDs
Type Diodes
Warranty
System
Hue
Color Temperature
Voltage
Power
CRI
Cutting section
Lifetime
Roll length
Product sold only as a complete set
Product description
3Y LED strips have an extended warranty period. 3 years warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created lighting installation. Each LED strip from the 3Y series is equipped with a Blue Tape mounting tape.
Warm white color
The warm white color of the lighting will emphasize the cozy character of the room. It will work well in apartments, especially in the bedroom and living room. It will help you relax and calm down. It is a color reminiscent of the color known from traditional light bulbs.
IP65HS LED strip
IP65 Heat Shrink LED strips are a product with increased resistance to moisture and splashes. Thanks to the use of a special heat-shrinkable band, whose characteristics differ from the traditional silicone coating found in waterproof tapes, it is a modern solution that allows for better color uniformity than in the case of LED strips with classic IP65. This solution allows maintaining high lighting parameters wherever we need increased resistance to moisture and splashes.
See colors in their natural shades
When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. This affects the way our eyes perceive illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reflects the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow for natural color reproduction on illuminated objects.
Requires installation of a power supply
The LED strip requires a low DC voltage of 12V. In order for the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be appropriately selected due to the power of the tape. The power related to 1 meter should be multiplied by the length of the tape in meters. It is worth adding 10% power reserve. Depending on the installation location, you can choose a slim slim power supply, a waterproof hermetic power supply or a furniture power supply.
Why is it worth choosing the professional version of the LED strip?
Professional LED strips are a proven and thoroughly tested product in our photometric laboratory. Many years of experience in the lighting industry have allowed us to refine important details regarding high-quality LED strips and their long life.
Professional tapes, different from Standard tapes, have a higher luminous flux, thanks to which, despite using the same LED strip power, the light emitted by a professional tape can be up to half as much as that of a Standard tape.
An additional advantage of using professional tape is that the life of the tape is more than twice as long.
Another advantageous feature of professional tapes is their repeatability. The selection of diodes is at a much higher level, thanks to which we can obtain a uniform color along the entire length of the tape (+- 10%).
